T 3377 150

4 5 6 3 2 14 Valid for contact arrangement: 03a, 04a, 05a, 06a, 07a 13,6 12 12 Panel cutout M 1:1 T 3627 150 U T 3627 159 U T 3527 150 U T 3527 159 U 7 T 3447 150 U (07-b) T 3447 159 U (12-a) 18 0 max 3,5 8 +0,1 19,1 0 M18x0,75 E 20 M18x0,75 (08-a) E 7 2,8 6,6 (07-a) +0,1 6 (06-a) 1 shown with ring nut 5 (05-b) D Rated voltage Rated voltage Rated impulse withstand voltage Pollution degree Installation category Insulation group C Current rating Insulation resistance Contact resistance Climatic category Temperatur range IP degree Insertion and withdrawal force B Mechanical operation DIN Standard EN 61076-2-106 IEC 60130-9 1) IEC 60664-1 UL 1977 IEC 60664-1 60664-1 IEC 60664-1 IEC 60664-1 IEC 60512-5-2 UL 1977 IEC 60512-3-1 IEC 60512-2-1 IEC 60668-1 IEC 60668-1 IEC 60529 IEC IEC IEC 60512-13-2 60512-9-1 Housing material Dielectric material Contacts Termination technique 4 04-a 5 5S 6 7 05-a 05-b 06-a 07-a 300 V 300 V 100 V 300 V (100 V) (63 V) (32 V) (63 V) 250 V 1500 V 1200 V 1500 V (840 V) (500 V) (840 V) 1 (2) 7 8 12 14 07-b 08-a 12-a 14-a 5 100 V 150 (32 V) 10A/+40°C 1200 V 3A/+40°C/+104°F Contact Number arrangement of View on contacts mating side 2) 40 / 100 / 56 35N 50N 55N 60N silver >500 mating cycles gold >1000 mating cycles brass or zinc die cast nickel plated or thermoplast thermoplastic silver or gold plated, please order contacts separately acc. to drawing M-N 02 015 00XX X (3-8pol) or M-N 02 010 0157 X U (12-14pol) C type-number-crimp with hex nut SW20 0,09-0,25mm² / 28-24 AWG locking system bayonet locking outside (mateable with locking inside) dimension of nut 23 Gewicht (errechnet) / Calc WT : Prüfmaß / Testdimension Teileindex / Partindexnumber: Zul. Abw./Tolerances : ISO Bagatelle change: 2768-c Maßstab / Scale : 2:1;1:1 CUSTOMER DRAWING DIN / ISO 13715 28.04.2020 Drawn MCARLE Status Released Gepr. 30.04.2020 Checked MGRIMM A3 Gez. 1) Edition 2000-05 under operating conditions >108 Ohm All technical data have been measured in a laboratory environment and can be different during pratical usage of the product. Any product informtion is for descriptive usage only and not legally binding; particulary the information does not constitute or provide any legal guaranties. Do not connect or disconnect under load. Metal housing parts shall be securely incoporated to protected ground. Parts according to directive 2002/95/EG (RoHS). 2) 6 T 3277 159 U 50N UL 94 VO 7 T 3277 150 U type-number-crimp with ring nut IP 40 Flamability 8 T 3327 159 U -40°C...+100°C / -40°F...+212°F 30N D 4 T 3327 150 U (04-a) (03-a) 10 Ohm T 3427 159 U V (32 V) 60 V I II, T 3427 150 U T 3377 150 U (05-a) - crimp 2-6 pol (exclusive 5S): 0,09-1,0mm² / 28-18 AWG 5S, 7, 7S, 8pol: 0,09-0,75mm² / 28-20 AWG Wire gauge A 3 03-a T 3437 159 U 20 Number of contacts Contact arrangement Contact arrangement T 3437 150 U 0 6,6 1 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. F 12 +0,1 6,4 T 3647 159 U FAI2020-001468 13,6 T 3647 150 U 5 202000001 Index Änderung/Description 01 30.04.2020 MCARL Datum/Date Name Gerätedose female receptacle Amphenol Tuchel Industrial GmbH M Blatt/Sheet NB T 3XX7 15X U Ers. f. / Replacement for : M-NB T 3XX7 150 Rev01 1 1 Bl. NXM-V01 Valid for contact arrangement: 05b, 07b, 08a, 12a, 14a F 20 Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of the utility model or design. (14-a) 1 SW20 7 8